Guide

How to read a nursing home inspection report and its severity codes

Every citation in a nursing home inspection carries a letter from A to L. That one letter tells you how serious the problem was and how many residents it affected.

Updated · About 4 minutes to read. Figures on this page are computed from this site’s data as of .

Three kinds of inspections

  • Standard inspections (also called recertification surveys). CMS says every Medicare- or Medicaid-certified home gets one about once a year on average. They are unannounced, and a team of health care professionals spends several days in the home checking resident rights, quality of life, medication management, skin care, assessments, administration, the environment, and food service (CMS Technical Users’ Guide).
  • Complaint inspections. When a resident, family member, or someone else files a complaint, the State Survey Agency may visit to investigate, according to Medicare.
  • Infection-control inspections, which focus only on the home’s infection-control practices.

When inspectors find that a home did not meet a federal requirement, they issue a citation, also called a deficiency. Each one names a federal requirement, often shown as an “F-tag” number, such as F600 for protecting residents from abuse.

The scope and severity grid

Each citation gets one letter that combines two judgments: severity (how much harm, or risk of harm) and scope (isolated, a pattern, or widespread). Isolated means one or a very limited number of residents. Pattern means more than a limited number but not the whole home. Widespread means throughout the home, or a problem with the home’s systems.

The scope and severity grid, with how often each code appears in the current CMS file

SeverityIsolatedPatternWidespread
Immediate jeopardy
a situation that has caused, or is likely to cause, serious injury, harm, impairment, or death
J
6,524 (1.6%)
K
1,934 (0.5%)
L
588 (0.1%)
Actual harm
a resident was harmed, but it was not immediate jeopardy
G
12,748 (3.0%)
H
437 (0.1%)
I
18 (under 0.1%)
Potential for more than minimal harm
no resident was found to be harmed, but there was a risk of more than minimal harm
D
265,134 (63.3%)
E
93,079 (22.2%)
F
28,995 (6.9%)
Potential for minimal harm
no actual harm, and little risk of more
A
0 (0.0%)
B
4,811 (1.1%)
C
4,414 (1.1%)

Across the 418,682 citations in the current file, which spans each home’s last three inspection cycles, D is by far the most common letter, at 63%. Actual harm or immediate jeopardy (G through L) makes up 5.3%, and immediate jeopardy alone (J, K, L) 2.2%. Even so, 4,334 homes (30%) have at least one immediate-jeopardy citation in that period.

How the letters affect the star rating

CMS turns each letter into points for the health inspection rating. Codes A, B, and C earn no points. D earns 4, E 8, and F 16. G earns 20, H 35, and I 45. Immediate jeopardy earns 50 for J, 100 for K, and 150 for L. Some citations that count as “substandard quality of care” earn extra points, and a home that needs a second, third, or fourth follow-up visit to prove it fixed problems gets added points too.

A few things are shown on Care Compare but not scored: citations still under informal dispute resolution, citations from the third-oldest standard inspection, and fire-safety (life safety) citations, which are not part of the Five-Star calculation.

Reading a citation, step by step

  1. Find the letter. Start with any G through L citations. Those mean a resident was harmed or placed in immediate jeopardy.
  2. Read what happened. The citation text describes the requirement the home did not meet. On Care Compare you can open the full inspection report.
  3. Check the source. Was it found on a routine inspection or because of a complaint? A pattern of complaint citations can show problems residents or families raised themselves.
  4. Check the date and correction status. Each citation has a survey date and a correction date or status. A status of “past non-compliance” means inspectors found the home had been out of compliance but had already corrected the problem before the inspection.
  5. Look for repeats. The same kind of citation across several inspection cycles is more telling than a single one.

Putting a home’s record in context

  • In CMS’s national averages, a home has 9.2 health citations in its most recent rating cycle. Each home page on this site shows that home’s count next to its state and national averages.
  • Inspection practices vary by state, which is one reason CMS ranks homes within each state.
  • Most citations are D-level: a real risk that inspectors want fixed, but no finding that a resident was hurt.

To read a home’s citations in plain words, find it through the states list. Each home page lists the most serious citations first, with the official CMS wording and the meaning of its letter.

Sources

Every rule and figure on this page comes from these official sources or from this site’s own data, as noted.

  1. CMS, Nursing Home Five-Star Quality Rating System: Technical Users’ Guide, September 2026 (PDF)
  2. Medicare, “Your Guide to Choosing a Nursing Home” (CMS Product No. 02174, PDF)
  3. Medicare Care Compare
  4. CMS Provider Data Catalog, nursing home datasets